How to Make a Tote Bag From a Pet Feed Bag

  • 01 of 06

    What You'll Need

    Totebag
    Debbie Colgrove. The Spruce Crafts, 2013.

    If you buy large bags of pet food, Rock salt, or many other items at the grocery store, you are purchasing packaging that you can re-use once it's empty to make great tote bags. This is a great re-use re-think kind of project that takes a used material and stops it from ending up in the landfill while creating a robust and durable bag that will be safe to use for years. Given the kind of material the bags are made of, it easily wipes clean, so it is no big deal if a grocery item leaks.

    Materials:

    • An Empty feed bag made from woven tarp like material
    • Scissors
    • Thread
    • 1" wide Webbing Strap - two 18" to 20" pieces
    • Optional but suggested - double fold bias tape
    • Sewing Machine
    Continue to 2 of 6 below.
  • 02 of 06

    Prepare the Bag

    Tote Bag
    Debbie Colgrove. The Spruce Crafts, 2013.
    • Flatten the bag. Fan, folding the sides of the bag using the original folds in the sides of the bag.
    • Cut the bag at the desired location, being sure that your cuts are perpendicular to the sides of the bag. You will want a bag area large enough to make a usable bag.
    • Turn the bag inside out and thoroughly wipe down the "fabric." Allow it to dry thoroughly before sewing.
    Continue to 3 of 6 below.
  • 03 of 06

    The Bottom Seam

    Tote Bag
    Debbie Colgrove. The Spruce Crafts, 2013.
    • With the bag still inside out, lay it flat with the desired side fold at the exact side edge.
    • Line up the bottom edges and sew a seam 1/4" from the edge.
    • Zigzag the seam allowance edge so that the needle goes off the edge enclosing the "fabric" threads.
    • For a secure seam that will hold a large number of groceries, enclose the bottom seam allowance in the double fold bias tape. Do not worry about enclosing the ends of the folded bias tape as the ends will be cut off in the next step.
    Continue to 4 of 6 below.
  • 04 of 06

    Squaring the Bag

    Tote Bag
    Debbie Colgrove. The Spruce Crafts, 2013.

    Squaring the bottom of the bag creates a bag that is easier to pack than a bag that does not have a squared bottom.

    • Lay the bottom of the bag on the side seam, creating a triangle corner.
    • Measure from the tip of the triangle up approximately 2" and sew across the bag as shown in the photo.
    • Trim the seam allowance to 1/4".
    • Turn under the end of a piece of double fold bias tape and enclose the end of the seam.
    • Attach the bias tape, enclosing the opposite end as you did the beginning.
    • Repeat for the opposite side of the bag.
    • Turn the bag right side out and finger press the seams flat. Experiment with a wooden seam pressing bar to create sharp creases.
    • Finger press the side fold lines to match the new corners of the bottom of the bag.
    Continue to 5 of 6 below.
  • 05 of 06

    Hem the Top of the Bag

    Tote Bag
    Debbie Colgrove. The Spruce Crafts, 2013.
    • Turn under 1/4" of the top edge to the inside of the bag.
    • Turn under again to enclose the raw edge.
    • Finger press well.
    • Sew the hem in place, sewing as close to the inside hem edge as possible.
    Continue to 6 of 6 below.
  • 06 of 06

    Attach The Straps

    Tote Bag Handles
    Debbie Colgrove. The Spruce Crafts, 2013.
    • On the outside top edge, decide on an even distance from each folded side edge for your strap placement, placing 1" of the end of each strap on the bag.
    • Evenly place both straps, so both straps are in the same location on each side of the bag.
    • Sew the straps in place by sewing a square on the 1" of ​the strap that is on the bag.