01 of 12
How to Make a Paper StarburstContinue to 2 of 12 below.
02 of 12
Get Your Supplies to Make These Paper Starbursts
To make these easy paper starbursts, you will need just a few things:
- Lightweight card stock or construction paper in beautiful colors, cut into 4" x 4" squares (If you want bigger starbursts or smaller ones, simply adjust the size -- say, to 3" x 3" squares or 2" x 2" squares.)
- Scissors or a paper trimmer
- Glue stick
To Hang the Paper Starbursts:
Continue to 3 of 12 below.
- Hole punch
03 of 12
Take a Square and Fold It in Half Into a Triangle
Start by taking one of the squares and folding it in half to form a triangle as shown.Continue to 4 of 12 below.
04 of 12
Fold the Triangle Again and Make 2 Cuts
Fold the triangle once again in half. Hold it so that the seam you just folded is on the bottom. Make two parallel cuts, each about 3/4 of the way up.Continue to 5 of 12 below.
05 of 12
Your Triangle Will Look Like This
At this stage, your triangle will look like this.Continue to 6 of 12 below.
06 of 12
Unfold Your Square
When you unfold the square you've cut, it will look like this.Continue to 7 of 12 below.
07 of 12
Fold and Glue the Inner Square’s Corners
Keeping the square with a corner facing you so that it's diamond-shaped and the cut corners are on the left and right sides, fold the two flaps of innermost corners over each other and glue them together. Try to keep the fold you've made rounded as you glue the corners together. (Hint: Putting a pencil into it when you glue it down will help).Continue to 8 of 12 below.
08 of 12
Turn the Square Over and Glue the Middle Set of Corners Together
Take your square and flip it over. Glue the middle set of corners together just as you did with the center corners, making sure that you keep the flaps rounded.Continue to 9 of 12 below.
09 of 12
Flip Over Your Square Again and Glue the Remaining Corners Together
Flip the square over once again and glue the last two corners together, again making sure that you keep the paper rounded. You now have a completed star point.Continue to 10 of 12 below.
10 of 12
Continue Making More Star Points
Take your next square and repeat the steps above. Keep making star points until you have a full star (about 7 points should do it for a star this size). Lay them out before gluing the points together.Continue to 11 of 12 below.
11 of 12
Glue or Staple the Points of Your Paper Starburst Together
Take your glue stick or a stapler and glue or staple the points of your star together at the bottom of each point, as shown.Continue to 12 of 12 below.
12 of 12
Here Are Some Finished Paper Starburst Decorations
When you are done, your paper starbursts will look like this. They are as gorgeous as they are easy to make!
If you plan to hang them around the house, you can make a hole at one of the top points of a star point and put a ribbon through and loop it so that it's ready for hanging.