Free Directions to Sew Fuzzy Dice

  • 01 of 07

    Materials & Cutting Directions

    Finished Set of Fuzzy Dice
    Debbie Colgrove, Licensed to

    Materials Needed:

    • Plush Felt (Craft Fur) - 12 - 3" squares
    • Contrasting felt for the dots
    • 8" cord to attach the dice - knot each end to help prevent it being torn out of the seams.
    • 2 - 2 1/2" blocks of foam or stuffing material depending on the effect you want.
    • Glue
    • Thread
    Continue to 2 of 7 below.
  • 02 of 07


    Marking the Fabric
    Debbie Colgrove, Licensed to

    On the wrong sides of 4 of the squares, mark 1/4" seam allowances. These pieces will be the top and bottom pieces of the dice.

    Continue to 3 of 7 below.
  • 03 of 07

    Join Four Squares

    Join Four Squares
    Debbie Colgrove, Licensed to
    • Place right sides together of 2 of the squares.
    • Stitch two squares together using 1/4" seams.
    • Attach another square in the same manner, and another square until you have 4 squares in a row.
    • Stitch the two ends together using a 1/4" seam.
    Continue to 4 of 7 below.
  • 04 of 07

    First Block End

    First Block End
    Debbie Colgrove, Licensed to

    Using one of the squares that have the 1/4" seams marked, line up the intersecting lines with the seams of the 4 connected squares, to form one end of the block.

    Continue to 5 of 7 below.
  • 05 of 07

    Cord and Second End

    Cord and Second End
    Debbie Colgrove, Licensed to
    • Knot one end of the cord.
    • Place the end of the cord in the seam allowance with the knot beyond the seam allowance
    • Attach another marked block as you did for the first end, placing the bulk of the cord inside the block as you stitch
    • Leave one side open for turning and stuffing purposes.
    Continue to 6 of 7 below.
  • 06 of 07

    Turn & Stuff

    Turn & Stuff
    Debbie Colgrove, Licensed to
    • Turn the block right side out.
    • Stuff the block and hand stitch the opening closed.
    • Repeat for the other block.
    Continue to 7 of 7 below.
  • 07 of 07

    Dot Placement

    Glue the Dots
    Debbie Colgrove, Licensed to
    • Cut circles of felt for the dots. We recommend using a pen cap and ink pad to stamp the felt and cut perfect circles.
    • Glue the dots onto the blocks. A fact my son taught me that I didn't know, is that the dots on the opposites sides of dice, always add up to 7.
    • Place 6 dots on the top and 1 dot on the bottom. Work around the sides placing 3 dots, 2 dots, 4 dots, and 5 dots.