How to Make Paper Lanterns

  • 01 of 09

    DIY Easy Paper Lanterns

    Paper lanterns are incredibly easy to make and extremely versatile for decorating your home or party. If you are a busy mom with creatively inclined kiddos, you probably have a bunch of toilet paper rolls stock-piled around your home—if not, start saving some up. These lanterns can sit on side tables, they can be made into centerpieces, and you can string them up to hang inside or outside your home.

    We recommend hanging them on string lights for your next party. You could also leave the toilet paper roll out and set your lanterns on a table with flameless tea candles. The lanterns made here are just your launchpad—get creative with how you decorate them. You can trim them with ribbon, crepe paper, or fringe, depending on your decorating needs.

    Continue to 2 of 9 below.
  • 02 of 09

    Gather Your Materials

    For the paper lanterns, you will need:

    • Toilet paper rolls (one per lantern)
    • Craft paper in contrasting colors or patterns (2 sheets per lantern) cut to size: 12" x 12". We recommend one decorative paper for the outer layer, and one plain color for the inner layer.
    • Glue dots, scissors
    • Stapler
    • Ribbon

    Note: If your child is making this craft, please be sure to supervise them while they're using scissors.

    Continue to 3 of 9 below.
  • 03 of 09

    Cut Base Paper in Half

    If you are working with craft paper that's 12" x 12", fold in half and cut. You can use the halves to cover two toilet paper rolls—one per roll.

    Continue to 4 of 9 below.
  • 04 of 09

    Measure and Size to Fit Roll

    Wrap the craft paper around the toilet paper roll to measure and cut off any excess.

    Continue to 5 of 9 below.
  • 05 of 09

    Wrap Around Roll and Glue

    Secure the paper around the tube using glue dots. We used about six to get the job done.

    Continue to 6 of 9 below.
  • 06 of 09

    Measure and Cut Outer Paper

    Using a contrasting craft paper, lay your covered roll on the paper to measure the amount needed. Cut enough to wrap around the roll once. This paper will become your "outer paper," so ​it should be the more decorative paper.

    Continue to 7 of 9 below.
  • 07 of 09

    Fold and Cut Outer Paper

    Take the outer paper strip that you've just measured to size, and fold in half lengthwise. Cut slits across the fold. Start cutting your slits about an inch from the edge. The more slits you have, the more of the inner roll cover you will see.

    Continue to 8 of 9 below.
  • 08 of 09

    Wrap Outer Paper Around Roll

    Wrap the outer paper around the covered roll. Pinch the edges towards the middle to make the slits pop out. Staple the outside cover to the toilet paper roll.

    Continue to 9 of 9 below.
  • 09 of 09

    Attach Handle

    If you want to make a handle for your lantern, measure and cut a length of ribbon of your choice. The length of the ribbon can be as long or as short as you want it to be. Use glue dots to attach the ribbon to either side of the lantern at the top.