How to Make Bubbly Coconut Milk Soap

Close-Up Of Coconut With Soap And Massage Oil On White Background
Seksak Kerdkanno / EyeEm / Getty Images
  • 01 of 09

    Make Soap With Coconut Milk

    Lots of soap makers use milk in their soaps. Like Cleopatra's famed milk-baths, milk in soap provides extra moisturizing qualities and a creaminess that can't be matched with just oils. Most soapers use goat's milk, which makes a  lovely soap. But this batch uses canned coconut milk. It gives the expected extra moisturizing qualities but also something extra–super bubbly lather. It's extra creamy and extra bubbly.

    Continue to 2 of 9 below.
  • 02 of 09


    To make a two-pound batch, you need:

    • 5.2 ounces palm oil
    • 6.3 ounces olive oil
    • 6.3 ounces coconut oil
    • 1 ounce castor oil
    • 2.1 ounces canola oil
    • 3 ounces lye
    • 7.2 ounces coconut milk
    • .9 ounces fragrance oil

    The proportions of oil you should have are:

    • 25 percent palm oil
    • 30 percent olive oil
    • 30 percent coconut oil
    • 5 percent castor oil
    • 10 percent canola oil
    Continue to 3 of 9 below.
  • 03 of 09

    Preparing the Coconut Milk

    Freeze the milk in an ice cube tray. This​ makes the cubes easy to measure out later.

    Continue to 4 of 9 below.
  • 04 of 09

    Make the Lye-Milk Solution

    After measuring out the lye, add it slowly to a bit of chilled (but not frozen) milk, then add the rest of the measured milk to the pitcher in frozen cubes. As it starts to heat up, the cubes will melt. Keep stirring gently.

    The lye will turn the milk a light amber-orange color. It also will (briefly) give off a nasty ammonia-ish smell. This is normal and will go away quickly.

    You'll notice that the solution starts to thicken. This is the fat in the milk actually making "soap" with the lye in the lye solution. But there's not enough fat in the milk to make a whole lot of difference, just enough to thicken up the solution.

    Since you want to avoid scorching the milk as much as possible, let the lye cool down to about 90 F.

    Continue to 5 of 9 below.
  • 05 of 09

    Measure out the Oils

    Since this is just a small batch of soap, you can use a large pyrex pitcher to measure the oils. Melt the oils in the microwave for a minute or two. Mix in the liquid oils and you're ready to go. As with the lye, keep the oils around 90 F. 

    Continue to 6 of 9 below.
  • 06 of 09

    Add the Lye Solution to the Oils

    Slowly add the lye solution to the oils, making sure to scrape all of it out of the pitcher.

    Continue to 7 of 9 below.
  • 07 of 09

    Mix the Soap

    Mix the oils and lye as you would with any other batch. However, because you're working with lower temperatures and a thickened lye solution, mix the soap very well. Get it to a really thick trace before you pour it. If you don't, it's possible to get what's called "false trace," and your soap will separate or develop pockets of lye in it. 

    Continue to 8 of 9 below.
  • 08 of 09

    Pour It into the Mold

    Pour the soap into the mold; scrape the sides of the pitcher with a rubber spatula if necessary. Knock the mold on the counter to help any trapped air bubbles to rise to the top. Cover the soap with a light cloth and set it aside to do its magic.

    Continue to 9 of 9 below.
  • 09 of 09

    Unmold and Enjoy

    After the soap has cooled, you can unmold and slice it. While the soap will be safe to use in just a few days, this milk soap benefits from a cure time of four to six weeks.