01 of 06
Sew an Easy Hanging Bag for Clothespins
Drying clothes outdoors on a line instead of in a dryer saves energy and gives clothing a fresh outside smell. Keep your clothespins handy with this DIY bag that can hang conveniently on the line.
Sewing a clothespin bag is fast and simple, requiring only the most basic of sewing knowledge. From start to finish, this project takes only 30 minutes. Featuring two contrasting fabric patterns, your bag can easily be customized to fit your style, whether that's vintage, modern, or simply fun. This would make a great housewarming gift, including a clothesline and clothespins!Continue to 2 of 6 below.
02 of 06
Supplies and Tools Needed
- 1/2 yard cotton fabric - for outside
- 1/2 yard cotton fabric - for lining
- Wooden clamp-style trouser or skirt hanger
Continue to 3 of 6 below.
- Rotary cutter, ruler, and cutting mat
- Sewing machine
- Iron and ironing board
03 of 06
Pattern and Cutting Guide
Cut the outside and lining pieces with a rotary cutter and cutting ruler as follows:
Start by measuring the width of your hanger. Add 2 inches to the width. This is the width of the clothespin bag pieces.
Next, double the width you just calculated. This is the height of the clothespin bag pieces.
So, for the example, the hanger was 12 inches wide. Therefore, both the outside and lining pieces are cut to 14 inches x 28 inches.
Download the JPG clothespin bag pattern and print it out. Be sure to print the pattern at full size and use the 1-inch square to check for accuracy. If it's off by a very small amount, it will still work, but if it's off by 1/8 inch or more, re-print the pattern.
For both the outside and lining pieces, fold the fabric in half lengthwise and pin the pattern to the fabric with the long straight edge on the fold. Cut around the pattern.Continue to 4 of 6 below.
04 of 06
Sewing the Outside and Lining Pieces
Place the outside and lining pieces right sides together and pin around the edges.
Sew around the entire shape, leaving a four-inch opening on one of the long sides, near the bottom half of the piece. Use a 1/4 inch seam allowance and backstitch the beginning and end of the seam.
Trim the corners and clip the curved edge to reduce bulk and keep the curved edge smooth.
Turn the shape right side out, poking the corners into shape with a chopstick. Iron the clothespin bag and press the seams open. Press in the seam allowance of the opening so the seam is even.Continue to 5 of 6 below.
05 of 06
Assembling and Topstitching the Edges
Top stitch around the curved seam, sewing 1/8 inch from the edge.
Fold the clothespin bag in half with wrong sides together. Pin and sew the sides and straight across the top edge, sewing 1/8 inch from the edge. This assembles the bag, topstitches the edges, and closes the opening all at once.Continue to 6 of 6 below.
06 of 06
Finishing and Using the Clothespin Bag
Slide the hanger inside the bag. It should fit comfortably at the top with a bit of room to spare.
All that's left is to fill your bag with clothespins and start hanging up the next load of laundry!
In addition to holding clothespins, use this bag to hold:
- Small accessories in a closet
- Grocery bags
- Little stuffed animals or other toys
- Sewing or craft supplies