01 of 06
To make a jar or container candle, you will need:
- Several empty jars or containers
- A double boiler
- Candle wax
- Candle wicks (Recommended: pre-waxed and wired wicks with wicks clips)
- Crayon pieces
- Oven mitts
- Wax paper
- Optional: candle fragrance
02 of 06
Prepare Your Containers
Once you've chosen your candle containers—where it's jars, glasses, teacups, mugs, or otherwise—prep them for use.
Make sure the containers are clean and completely dry. Place them on a sheet of wax paper to ensure that any wax that spills will be easy to clean up.
Insert a candle wick in the center of each container. If you are using wicks with wick clips (little metal disks on the end), the wicks should stand up straight without any assistance. If you are using wicks without clips, you can hold the wick in position by tying the top of the wick to a pencil and balancing the pencil across the top of the container.
03 of 06
Melt the Candle Wax
With all of the prep work complete, start work on your candles.
- For safety reasons, wax should always be heated in a double boiler, which is essentially a pan inside of a pan. Fill the bottom pan with water and then place the second pan with the wax inside of it. If you don't own a double boiler, create one by placing an empty can, pan, or glass container inside of one of your pans. Make sure the pan you use is disposable because it will be covered with wax when you're done.
- Cut the wax into small pieces and place it in the top of the double boiler or the pan-within-the-pan. Then, heat over medium heat until the wax is completely melted.
- Decide what color you want your candles to be and then add bits of crayons to the wax and heat until melted. Continue adding bits of crayon until you are satisfied with the darkness of the color. If you're not sure how the color will look when it's dry, dip a popsicle stick into your wax. The color on the stick is a good indicator of your finished color.
- Add the fragrance to the wax if desired, but be careful not to overdo it. Then, turn the stove off. Do not leave the stove unattended while heating wax, and be sure to keep a fire extinguisher nearby as a safety precaution.
04 of 06
Pour the Wax Into the Containers
Use oven mitts or pot holders to remove the wax from the stove. Carefully pour the wax into the first container until it reaches the top of the container (or the desired height). Repeat with any remaining containers.
Allow the wax to cool undisturbed for several hours, or until completely hardened.Continue to 5 of 6 below.
05 of 06
Top off Your Candles and Trim the Wicks
Sometimes you'll end up with a depressed area around the wick of the candle. Melt some more wax, and pour it into the depression. Once the new wax has hardened, trim the wick down to size. Your candle is ready for use.
06 of 06
Clean Up Tips
Cleaning up after a project is never fun, but you can easily minimize the hassle.
- Do not pour wax down the drain. Allow any leftover melted wax to cool, and then store the dried pieces for later use. You should also dump the water from your double boiler outside to ensure that no wax goes down the drain.
- Clean up any wax on or near the stove eye. Wax will ignite if it reaches a high enough temperature.